제품소개

S-CON200

· Function(기능)
Display ,analog output and Alarm outputs
· Input(입력)
DC/RTD/PMC/TC
· Output(출력)
mA,V / dc
· Other Spec.(기타)
Alarm setter
제품 상세정보

ORDERING INFORMATION
Specify code number and variables
@Code number : SCON-Model-Input,Output,Power(e.g.S-CON 200 – DNX)
@Special input,outputs range : CODE,Display range,Input range Output range
(e.g. S-CON 200-DNX,0-9999,4-20mA,4Alarm)

GENERAL SPECIFICATIONS
Construction :panel flush mounting
Connection :screw terminals
Housing material :Plastic(resin) light-gray
Input configuration :Differential Input
Scaling :Functional switches at the front panel

DISPLAY
LED : 0.56 inch or 1 inch 7-segment, red or green
Number of display digits : 4(-9999 ~ 9999)
Decimal point position : 3 positions selected by a programmed functional switches
at the front panel
Set-point adjustmets : front-accessed programmed functional switches
Hysteresis(dead-band) : 0.1~2.0% of FS by programmed functional switches
Over-range indication : display “OVEr”
Engineering unit indication : sticker attached
Burn Out : Selectable Up-Scale or Down-Scale

INSTALLATION
Power Supply : AC 110V /220V 50/60Hz
DC 24V ±10%,5VA
Operating temperature : 0 to 55 ℃(32 to 131℉)
Operating humidity : 20-80% RH (Non-condensing)
Mounting : panel flush mounting
Size : W96 × H48 × D118mm (3.78″×1.89″×4.65″)

PERFORMANCE
Accuracy : ±0.1% of FS
Temp. coefficient : ±0.01% of FS + 0.1 digit / ℃
Insulation resistance : 100MΩ or more with 500VDC
Dielectric strength : AC1500V at 1 Minute (input to power)

tel: 01087315801