제품소개

SCON5500X (MULTI)

· Function(기능)
Universal Two Inputs (Input 1, Input 2)
· Input(입력)
V, mV, mA, Loop Powered, RTD, T/C, Resistance and Potentiometer, Strain Gauge....
· Output(출력)
Analog-Output(Isolated) (mV / V / mA), RS-485, Alarm 1~7, DI 1~7,Frequency
· Other Spec.(기타)
Communication Interface (RS-485) standard (Isolated),7 Points Contact output or Input (Alarm 1~7 or DI 1~7)
제품 상세정보

 

 

□ Function & Features

* Universal Two Inputs (Input 1, Input 2)
(V, mV, mA, Loop Powered, RTD, T/C, Resistance and Potentiometer, Strain Gauge….)
* Multiple functions
(Peak-Hold,Counter,Integrator,Square-root, Adder, Substracter, Multiplier, Divider)
* Front-programmable
* Both input type, output, and range are configurable
* 6-digit LED display
* Analog-Output(Isolated) (mV / V / mA)
( ±10V, ±5V, ±1V, 0~10V, 0~1V, 0~5V, 4~20mA, 0~20mA)
* 7 Points Contact output or Input (Alarm 1~7 or DI 1~7)
* Communication Interface (RS-485) standard (Isolated)

□ GENERAL SPECIFICATIONS

– Construction : Panel flush mounting
– Connection : M3.5 Screw terminals
– Housing material : flame-retardant Poly Carbonate (white)
– Power supply : AC 85 ~ 265V or DC 18 ~ 32V ( about 3VA)
– Operating temperature : -5 ~ 55 ℃ (23 ~ 131 ℉)
– Operating humidity : 10 ~ 90 % RH (non-condensing)
– Display range : 6 Digits ( -199999 ~ 999999 )
– Dimension : W96 x H48 x D118mm (3.78″ x 1.89″ x 4.65″)
– Dimension of mounting hole(cutting) : W92 x H44mm (3.62″x1.73″)

—————————————-
SCON5500 – □□□□□□□
Universal Input (1 and 2) Selection
– DC Current & Voltage (Input 1, Input 2)
– Current : (Usable range) ±20mA(max.)
– Loop-Powered Current : (Usable range) 4~20mA (input 1)
– Voltage : (Usable range) ±10V(max.)
– Millivolt : (Usable range) ±1V(max.)
– Thermocouples (Input 1, Input 2)
– K(CA), E(CRC), J(IC), T(CC), B(RH), R, S, N
– RTD (Input 1)
– Pt 100 Ω
– Potentiometer (Input 1)
– Total resistance 100Ω ~ 200KΩ
– Resistance (Input 1)
– Total resistance 100Ω ~ 200KΩ

Analog Output Selection
0 : None
1 : DC 1V, 5V, 10V(Max.)
2 : DC ±1V, ±5, ±10 (Max.)
3 : DC 20mA (Max.) (Load Resistance : 0~600Ω)
R : Other Special Spec.

Relay Contact Output ( 0:None 1 ~ 7 )
00 : None
Ax : Relay Contact (A1~A7)
Bx : Photo coupler (B1~B7)
Rx : Other Special Spec.

Input ( 0 : None 1 ~ 7 )
00 : None
Ax : Voltage (24V) A1 ~ A7
Bx : Relay Contact or Open Collector (B1~B7)
Rx : Other Special Spec.

Communication port
0 : None
1 : RS-485
2 : RS-232

Power Supply
Z : AC 85~265V
Y : DC 18~32V
R : Other Special Spec.

■ FUNCTIONS
– Analog Calculations
[000] Normal input (A)
[001] Square Root (A)
[002] Root Extraction (A)

-Peak-Hold
[004] Peak-Hold(Higher)(A)
[005] Peak-Hold(Lower)(A)
[006] Peak-Hold(High/Low)(A)
[105] Peak-Hold(Higher)(B)
[106] Peak-Hold(Lower)(B)
[107] Peak-Hold(High/Low)(B)

[007] ADDER(A+B) : Addition of 2 analog inputs
[008] SUBTRACTOR(A-B) : Subtraction of 2 analog inputs
[009] MULTIPLIER(A*B) : Multiplication of 2 analog inputs
[010] DIVIDER(A/B) : Division of 2 analog inputs

[101] Normal input (B)
[102] Square Root (B)
[103] Root Extraction (B)
[108] SUBTRACTOR(B-A) : Subtraction of 2 analog inputs
[109] DIVIDER(B/A) : Division of 2 analog inputs

-Counter
[003] INTEGRATOR (A) : Count of input range by count rate (Count Per Hour).
[104] INTEGRATOR (B) : Count of input range by count rate (Count Per Hour).

tel:01087315801